Prusa i3 Duo - Drukarka 3D
Nowy produkt
Prusa i3 Dual Extruder kit includes Prusa i3 frame and mechanics, the dual Ormerod 2 extruder and 5 different colors of PLA plastic filament.
Please choose the preferred type of frame with the drop-down box on the right.
- Napisz opinię
Opis
| Print Size (X Y Z) | 200 mm x 200 mm x 180 mm |
| Layer Resolution | 100 Microns |
| Chasis | Aluminum or Steel |
| Filament | ABS, PLA, HIPS, PVA. |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.5 mm |
| Extruders | Two (dual Omerod 2 extruder) |
| Electronics | RAMPS 1.4, Arduino Mega 2560 |
| Print Speed | 50-100 mm/s |
| Print Area | 200 mm x 200 mm |
| Print Plate | Heated bed and fiberglass plate |
| 3D Printer Dimensions | 420 mm x 370 mm x 380 mm |
| Shipping Box Dimensions | 400 mm x 200 mm x 400 mm |
| Shipping Box Weight | 9 kg |
Więcej informacji
3D printer version: Prusa i3 Dual Extruder (Ormerod 2 bowden extruders)
Factory lead time : 1-5 working days
Prusa i3 Dual Extruder kit includes:
- 1x Set of black Moulded ABS plastic parts (extra parts for the dual extruder are 3D printed).
- 1x Frame and carriage
- 2x Full metal Ormerod 2 bowden extruder for filament 1.75 mm, extruding 0,5 mm (with thermistor and heater)
- 1x Heatbed Mk2B (with Thermistor)
- 1x Arduino Mega2560 R3
- 1x Ramps 1.4 and 5 stepsticks A4988
- 1x Power Supply 400W 33A 12V DC (110V or 220V)
- 2x Fan 4x4
- 2x Hobbed insert
- 3x Mechanical endstop
- 2x GT2 Pulleys and Belts (can be easily tighten)
- 6x NEMA 17 stepper motor
- 11x LM8UU linear bearing
- 2x Coupling 5x5
- 4x 608 ball bearing
- 1x 624 ball bearing
- 1x fiberglass plate
- 4x Binder clips
- Complete set of screws, grub screw, washers, nut, nylstop nut, threaded rod (Y-axis threaded rods-10 mm thick), smooth rod (stainless) and connection cables.
Also included:
- 5x colors of PLA filament, 1.75mm, 80g each
- Polyimide Tape 33m x 10mm (Kapton tape)
WARRANTY
If any part arrived damaged, it will be resend to you without any additional charges.
The plastic parts are moulded now, not printed anymore. However, it is still advised to print the backup parts once the 3D printer is already set up.